The method and steps of treating duck manure with a slot type organic fertilizer tipping machine

The method and steps of treating duck manure with a slot type organic fertilizer tipping machine

1. Stir well the fermentation agent: Add an appropriate amount of organic fertilizer fermentation agent to about 3-5 tons of duck manure. Add an average of 20-30 kilograms of rice bran, corn, and bran to each kilogram of fermentation agent, stir well, and sprinkle them into the prepared materials (referring to the duck manure adjusted for dry and humidity in step 2) for the best effect.

2. Moisture regulation: During the process of fermenting organic fertilizers, it is very important to determine whether the moisture content is suitable. It should not be too high or too low, and should be kept at 60-65%. The judgment method is to tightly grasp a piece of material, see a watermark on the finger joint, but do not drip, and it is advisable to disperse on the ground (if the moisture is too high, dry straw powder, wheat bran, and bran can be added to neutralize the moisture).

3. Building a fermentation pile: When making a fermentation pile, it should not be too small or too short. If it is too small, it will affect fermentation. The height is generally around 1.5 meters, the width is about 2 meters, and the fermentation effect of a pile with a length of 2-4 meters or more is better. The top layer is covered with semi wet straw (especially during composting in winter to provide insulation). If it rains, it can be simply covered with plastic film, but there is no need to seal it (note: straw decomposition is aerobic fermentation, not sealed, and it is required to be stacked loosely as much as possible). On sunny days outside of winter, the plastic film can be opened once a day to facilitate aeration and aerobic fermentation. To avoid rain, If conditions permit, a rain shelter can be set up above the material to prevent it from getting wet. When building a pile, it is advisable to add organic materials such as straw powder, mushroom residue, peanut shell powder, or rice husk, sawdust, etc. to the material in order to regulate its aeration. If rice husk or sawdust are added, the fermentation time should be extended due to their high cellulose lignin content.

4. Mixing and aeration: This is compost fermentation, and oxygen fermentation is necessary. Therefore, during the fermentation process, oxygen supply measures should be increased. Stacking should not be tightly pressed, and natural looseness should be maintained. After stacking, a stick can be used to poke several holes in the manure pile to achieve mixing, frequent flipping, and aeration, otherwise anaerobic fermentation will affect the material fermentation effect.

5. Fermentation completion: generally, after 72 hours of duck manure accumulation, the temperature will rise to 50~60 ℃, and can reach more than 65 ℃ on the fourth day. Under this high temperature, it is recommended to start loosening the material, which can be overturned once, or inserted with a stick or a long rake to loosen the material for several times. In general, during the fermentation process, there will be 2-3 times of high temperatures above 65 ℃, which can be overturned 2-3 times to complete the fermentation, completely deodorize the material, ferment and mature, and sterilize and kill insects. The symbol of success is that the material has completely lost the foul smell of feces, and instead has a faint aroma after biological fermentation.

The fermentation time of the slot type organic fertilizer tipping machine depends on the degree of pollution of the raw materials used and whether the added straw is used for cutting short. Alternatively, if the manure is foul smelling, the corresponding fermentation time is longer, which may take more than 20 days. If compared to fresher manure, the fermentation can be successful in about 15 days. During this period, the manure is loosened every 3 days, and only needs to be loosened or flipped twice.

Application of Bioorganic Fertilizer Granulator in Fertilizer Processing

Bio-organic fertilizer refers to a type of microbial fertilizer and organic compound composed of specific functional microorganisms and organic materials that are mainly sourced from animal and plant residues (such as livestock and poultry manure, crop straw, etc.) and undergo harmless treatment and decomposing. Fertilizer effect. Because of the addition of Bacillus subtilis, Bacillus amyloliquefaciens and other beneficial bacteria, which can decompose and utilize plant residues in the soil, it is also popularly called “bacterial fertilizer”. I recommend the fertilizer equipment used in the decomposing process is the compost windrow turner.

Bio-organic fertilizer has complete nutrient elements, which can improve the physical and chemical properties of soil and enhance the ability of soil to retain water, fertilizer and supply. After entering the soil, the beneficial microorganisms form a symbiotic proliferation relationship with the microorganisms in the soil, which not only inhibits the growth of harmful bacteria, but also produces a large number of metabolites during the growth and reproduction process, promotes the decomposition and transformation of organic matter, and directly or indirectly provides a variety of nutrients and stimulation for crops Sexual substances, promote and regulate crop growth. Continuous application can greatly alleviate continuous cropping obstacles and reduce environmental pollution. It is an environmentally friendly fertilizer. We have a complete set of organic fertilizer machine.  

In production, biological bacterial fertilizers with organic matter content above 50% are generally recommended to use 120-150 kg per mu as base fertilizer or topdressing, which can reduce labor input.

Equipment configuration and process flow of chicken manure organic fertilizer production line

The chicken manure organic fertilizer production line uses fresh chicken manure as raw material, undergoes a series of processing treatments, and produces high-quality chicken manure organic fertilizer. There are two steps required for processing commodity organic fertilizers: the pre fermentation and treatment part and the deep processing granulation part. The complete production line equipment includes fermentation stacker, forklift silo, crusher, mixer, granulation machine, dryer, cooling machine, screening machine, coating machine, packaging machine, belt conveyor, and other equipment.

Process flow of organic fertilizer granulation production line configuration:

1. The processing of organic fertilizers mainly involves collecting raw materials, then proportioning them according to the required formula, adjusting the moisture and carbon nitrogen ratio of the raw materials, and starting fermentation.

2. Fine crush the fermented raw materials to achieve the required particle size before granulation.

3. Add the crushed raw materials to the corresponding auxiliary materials and stir evenly.

4. Organic fertilizer granulator is used to granulate the mixed raw materials. The granulator includes disc granulator, new wet granulator, polishing machine, drum granulator and other models. Appropriate granulators are selected according to the characteristics of raw materials.

5. The prepared particles are transported to an organic fertilizer dryer, and their original moisture content is dried to below 15% to increase their particle strength.

6. The dried particles are transported to the organic fertilizer cooler and quickly cooled and shaped by natural or forced cold air.

7. There may be some oversized or undersized unqualified particles in the produced particles, which will be screened out using a screening machine. The unqualified particles will be returned to the corresponding process to remake the particles, and the qualified particles will enter the next process.

8. Use a coating machine to evenly spray a layer of coating agent on the periphery of the particles, which can effectively supplement the trace elements of the product and improve its brightness and fullness.

9. Qualified products are transported to a fully automatic packaging scale for weighing, packaging, and warehousing, and all processing processes are completed.

How much is the equipment for the chicken manure organic fertilizer production line

The equipment for a simple chicken manure organic fertilizer production line is within 100000 yuan, and the customer requirements vary. The organic fertilizer production line we configure for each customer also varies. The low configuration of the chicken manure organic fertilizer production line only requires a crusher, mixer, granulator, screening machine, and packaging machine. This is a basic configuration, and equipment is added according to the actual needs and requirements of customers. Therefore, the equipment prices for the entire chicken manure organic fertilizer production line range from tens of thousands to hundreds of thousands.

Organic fertilizer equipment effectively solves pollution problems in agriculture and aquaculture

At present, the Chinese government has seriously recognized the importance of environmental protection and strengthened its efforts in environmental governance. Industrial enterprises, agricultural enterprises, and aquaculture enterprises with pollution sources have become the primary targets of national governance. The organic fertilizer production equipment with the ability to solve agricultural and aquaculture pollution has unknowingly become the direction of China’s future agricultural development. With the continuous innovation and rapid development of agricultural technology in China, organic fertilizer products have also undergone new changes. Through the continuous upgrading and improvement of organic fertilizer production equipment and technology, some new products representing higher high-tech levels have entered rural farmland, bringing new hope to China’s agricultural production.

The equipment of the chicken manure fermentation organic fertilizer production line responds to this problem and plays an environmental role in agricultural production. Chicken manure organic fertilizer contains a large amount of organic matter. Using chicken manure organic fertilizer can activate nutrients, loosen soil, enhance soil permeability, promote crop root growth, and enhance crop vitality and immunity. The proverb in rural areas of our country that “the land is fed by manure, and the seedlings grow by manure” to some extent reflects the role of applying chicken manure organic fertilizer in improving soil. Chicken manure organic fertilizer can also promote the proliferation of microorganisms in the soil, especially many beneficial microorganisms such as nitrogen fixing bacteria, ammonifying bacteria, cellulose decomposing bacteria, nitrifying bacteria, etc. Chicken manure organic fertilizer contains various active enzymes secreted by the digestive tract of animals, as well as various enzymes produced by microorganisms. After applying these substances to the soil, they can greatly improve the enzyme activity of the soil. Applying chicken manure organic fertilizer can improve soil activity and biological reproduction and transformation ability, thereby improving soil absorption, buffering, and stress resistance.

With the increasing attention to environmental protection, organic fertilizer equipment has gradually entered the market’s best-selling ranks. Its process is characterized by large production capacity, high degree of automation, and high product quality, which can produce various fertilizers. With the development of the environmental protection industry, countries have increased their environmental governance, especially in the treatment of waste.

How to use a tank composter for fermentation of organic fertilizer raw materials

Composting is an ancient and simple method of disposing of organic waste and making fertilizers. With the deepening of research and the improvement of methods, its application is highly valued by various countries, because it has good ecological significance and is also important for agricultural production. Come benefit. There are many reports that the preparation of seedbeds with decomposed compost can inhibit soil-borne diseases. And the antagonistic bacteria that come after the high temperature stage of the composting process can make the number of bacteria reach a high level; the organic matter in the composting process is difficult to decompose, stable, and easily absorbed by crops under the action of microorganisms; at the same time, microorganisms act on Reduce the toxic effects of heavy metals within a certain range. It can be seen that composting is a simple and effective method to make bio-organic fertilizer, which is beneficial to the development of ecological agriculture. In the process of composting, a compost windrow turner is generally used.

Most domestic organic fertilizer products are only composted and fermented for 15-20 days. Such products can only reach harmless standards. The high-quality organic fertilizer compost fermentation process generally takes 45-60 days.

This is because in the warming stage and high temperature stage of the composting stage, harmful microorganisms such as plant pathogenic bacteria, insect eggs, weed seeds, etc. will be killed. However, the main role of microorganisms in this process is metabolism and reproduction, and only a small amount is produced. Metabolites, and these metabolites are unstable and not easily absorbed by plants. In the later cooling period, the microorganisms will humify organic matter and produce a large amount of metabolites that are beneficial to plant growth and absorption. This process takes 45-60 days.

After this process, composting can achieve three goals, one is harmlessness; the other is humusification; and the third is a large number of microbial metabolites such as various antibiotics and protein substances. Only the materials that are decomposed by fermentation can be granulated with organic fertilizer by the organic fertilizer granulator.

Utilizing Organic Fertilizer Production Line to Process Agricultural Manure and Organic Fertilizer

At present, the commonly used utilization of farm manure is as follows: firstly, composting. Mainly, farmers use weeds, waste, and crop straw to accumulate compost during the hot season. The second is manure (excluding biogas residue and biogas slurry fertilizer). The third is biogas residue and biogas slurry. The main raw materials for biogas digesters are manure from livestock and poultry farming such as pigs, cows, and chickens, as well as waste from farms. Biogas is the main product, and biogas residue and biogas slurry are high-quality organic fertilizers. Biogas residue can be used as base fertilizer or topdressing. Biogas slurry is used for foliar fertilizer spraying. Biogas fertilizer is a pollution-free organic fertilizer in agricultural production, which can also control pests and has significant fertilizer effects, and is popular among farmers. The fourth is soil and miscellaneous fertilizers. Mainly used by farmers to clean courtyards, clean toilets, burn coal for cooking and heating, as well as urban household waste. After treatment, it can be used as fertilizer, promoting the effective utilization of resources.

The detailed production process of organic fertilizer is as follows:

1. Fermentation tipping machine: After mixing the raw materials, the raw materials are flipped during the fermentation process to ensure full and uniform fermentation of the raw materials;

2. Semi wet material crusher: finely crush the fermented raw materials to achieve the required particle size before granulation;

3. Horizontal mixer: Add the crushed raw materials to the corresponding auxiliary materials for uniform mixing;

4. Organic fertilizer granulator: The stirred raw materials are granulated, and there are various models of granulators. Reasonable selection is made based on the original characteristics and required particle varieties;

5. Drying machine: The prepared particles flow into a rotary dryer, drying their original moisture content below 15% to increase their particle strength and facilitate storage;

6. Cooling machine: The dried particles flow into the cooling machine, quickly cooling and shaping;

7. Drum screening machine: There may be a portion of oversized or undersized unqualified particles in the produced particles. The screening machine is used to screen them out, and the unqualified particles are returned to the corresponding process to remake the particles. Qualified particles flow into the next process;

8. Coating machine: Use the coating machine to evenly spray a layer of coating agent on the periphery of the particles, which can effectively supplement the trace elements of the product, improve the brightness and fullness of the product;

9. Automatic packaging machine: Use an automatic quantitative packaging machine to package finished particles into bags and transport them to the finished product workshop, completing all processing processes.

By utilizing these organic fertilizer production equipment, organic rich raw materials can be processed into ideal organic fertilizers for sale, thereby earning profits. The raw materials for producing organic fertilizers come from a wide range of sources, such as various livestock and poultry manure, urban sludge, animal and plant residues, etc. These raw materials are rich in organic matter, nitrogen, phosphorus, potassium, and other nutrients for crop production, and the purchase price is low. Organic fertilizers are suitable for crops such as wheat, rice, peanuts, fruits and vegetables. They can improve crop quality, improve fruit quality, and benefit human health. They are the best choice of fertilizers for pollution-free green food cultivation.

How to correctly solve the wear and tear of organic fertilizer production equipment

We purchase organic fertilizer production equipment to establish an organic fertilizer production line for organic fertilizer production. We all know that a complete organic fertilizer production line is valuable, so the maintenance and upkeep of organic fertilizer production equipment is particularly important.

How to correctly solve the wear and tear of organic fertilizer production equipment

1. A relatively easy factor to cause wear and tear on organic fertilizer equipment is dust. Organic fertilizer equipment actually generates a certain amount of dust during operation and after discharge. If not cleaned and maintained in a timely manner, the dust will enter various connections within the equipment, accumulating over time. As the amount increases, the friction at the equipment connections will increase, and even bacteria will accumulate, causing corrosion to the equipment and affecting its performance. So we require the staff to conduct a comprehensive inspection and maintenance of the organic fertilizer equipment in addition to using it.

2. During the operation of organic fertilizers, our staff also need to pay attention to the lubrication of the equipment connections. Long term use of the equipment poses a severe challenge to equipment lubrication. Once there is a lag, the friction force of the equipment will increase. Only high lubrication will provide good power support for the operation of organic fertilizer equipment, and staff should develop a good habit of regularly cleaning and maintaining the equipment.

3. In addition, we need to pay special attention to motor friction, otherwise it will affect the effectiveness of organic fertilizer equipment. The staff should pay attention to constantly checking the operation of the motor. Especially before running under load, the circuit of the motor should be checked and updated immediately if there is any damage to ensure safe operation.

The role of biological organic fertilizer granulator in processing organic fertilizers

The role of bio-organic fertilizers Bio-organic fertilizers have different functions due to the different types of microorganisms contained. In summary, they have the following effects.

⑴ Nitrogen fixation, such as root nodules and nitrogen-fixing bacteria, they can fix nitrogen in the air under suitable environmental conditions and provide nitrogen nutrition for crop growth. It is estimated that the annual biological fixation of nitrogen by crops can reach 101 million tons.

⑵Nutrient release effect Microorganisms decompose some substances in the soil that are difficult to be absorbed and utilized by crops and convert them into effective nutrients that can be absorbed and utilized by crops. For example, silicate bacteria can not only decompose difficult-to-decompose minerals such as potassium feldspar and mica in the soil, and release the fixed potassium, but also promote the conversion of insoluble phosphorus in the soil into a form that can be used by crops.

⑶ Growth-promoting effect After applying microbial fertilizer to the soil, it not only increases the nutrient content in the soil, but also promotes the synthesis of various vitamins, enzymes and other substances beneficial to crop growth, stimulates the growth of crops, and assists crops in absorbing nutrients. In the fertilizer production process, the addition of biological agents is before the fertilizer packaging.

⑷Disease resistance After some microorganisms are inoculated in the soil, they multiply in the roots of crops and become the dominant bacteria in the rhizosphere of the crops for a period of time, inhibiting or reducing the reproduction opportunities of pathogenic microorganisms, and some microorganisms will also have resistance to pathogenic microorganisms. Although microbial fertilizer can provide nutrients for crop growth and stimulate and promote crop growth, its role is still limited after all. In crop production, organic fertilizers and chemical fertilizers are mainly used to provide nutrients for crop growth. According to the different organic fertilizer materials, the selected organic fertilizer granulator is also different.

⑸Many raw materials in nature contain many beneficial microorganisms, but once these raw materials are applied to the soil, the microorganisms in them will be eaten by countless microorganisms in the soil. Therefore, it cannot survive stably in the soil, and its effect is difficult to show. However, if the beneficial bacteria are added to the fermented organic fertilizer after fermentation, the fermented organic fertilizer itself is the expansion medium, which will cause the bacteria to proliferate in large numbers. At this time, applying microbial organic fertilizer to the soil will quickly form a dominant population in the soil, which can play a good role in the root system of the crop. Fermented organic fertilizer has a good effect on exerting microbial activity. Welcome to buy our company’s organic fertilizer machine.

Process flow of organic fertilizer production equipment for poultry and livestock manure

For large aquaculture areas, a large amount of pig manure, chicken manure, and cow manure are produced every day by the farms. They are piled up and discharged at will, polluting the air and smelling, leading to river water pollution and surface water pollution. The environmental protection department is necessary to strictly investigate and rectify the environmental standards for large-scale operations that do not meet the standards. For a large number of sources of manure, there is a guarantee of raw material sources for organic fertilizer production lines, which can ensure that organic fertilizer processing increases enterprise efficiency. The production of livestock and poultry manure into organic fertilizers can also solve local environmental problems, and waste recycling and comprehensive utilization. The production of organic fertilizer from livestock and poultry manure as raw materials can not only meet the local fertilizer demand, but also meet the demand of surrounding markets. Animal manure organic fertilizer is widely used in various fields such as farmland, fruit trees, flowers, landscaping, high-end lawns, and soil improvement, with good results.

The workflow of the livestock manure organic fertilizer production line:

1. Raw material fermentation, using a fermentation tipping machine to flip and toss the raw materials during the fermentation process irregularly.

2. Use a forklift to shovel the fermented raw materials into the silo, where they are transported by a belt conveyor to a semi wet material crusher for crushing.

3. The crushed materials are transported to the organic fertilizer mixer through a belt conveyor, and the auxiliary materials are fed into the organic fertilizer mixer through another belt conveyor. The raw materials and auxiliary materials are uniformly fused and then transported to the granulator through a belt conveyor.

4. The organic fertilizer granulator converts raw materials into granules and then sends them to the organic fertilizer dryer through a belt conveyor. After drying, the materials are sent to the cooling machine through the belt conveyor for cooling.

5. The cooled particles are fed into the screening equipment through a belt conveyor, which has three discharge ports: small particles, qualified particles, and large particles. Small particles are returned to the granulation process through a belt conveyor, while large particles are fed into the crushing process through a belt conveyor. Qualified particles are fed into the organic fertilizer automatic packaging machine through a belt conveyor and packaged into bags.

Integrated equipment process for poultry and livestock manure treatment: raw material fermentation – automatic raw material batching system – crushing and mixing – organic fertilizer granulation – dryer drying organic fertilizer particles – cooler cooling organic fertilizer particles – screening machine screening qualified organic fertilizer particles – coating machine coating particles smoother – packaging scale automatic filling of organic fertilizer particles – sealing.

The integrated equipment for pig manure treatment includes: fermentation and tipping equipment, mixing equipment, crushing equipment, granulation equipment, drying equipment, cooling equipment, screening equipment, conveying equipment, etc. The complete set of pig manure organic fertilizer processing equipment can basically achieve full automation, and the higher the output, the higher the automation of the equipment equipped. The production equipment for pig manure organic fertilizer requires two steps to process commercial organic fertilizer: the pre fermentation and treatment part and the deep processing and granulation part.

The organic fertilizer production line can effectively improve the utilization rate of fertilizers

Bioorganic fertilizer refers to a fertilizer that is mainly composed of animal and plant residues such as livestock and poultry manure and crop straw, supplemented by harmless organic materials, and has a dual effect of microbial fertilizer and organic fertilizer. Compared with fertilizers, bio organic fertilizers have a complete set of nutrients and are popular among farmers, such as improving soil, improving product quality, improving crop rhizosphere microbiota, enhancing plant resistance to diseases and insects, promoting the use of chemical fertilizers, and increasing the utilization rate of fertilizers.

There are several types of conventional machinery and equipment for producing organic fertilizers:

Organic fertilizer tipping machine: During the fermentation process, the raw materials are flipped to control the uniformity of fermentation and the temperature at which the raw materials are fermented.

Organic fertilizer crusher: finely crush the fermented raw materials to meet the granulation requirements.

Organic fertilizer mixer: Fully stir and blend the auxiliary materials and raw materials according to the formula requirements, to make their nutritional composition more uniform.

Organic fertilizer granulator: The mixed raw materials are made into predetermined particles using granulator equipment and loaded with organic fertilizer.

Organic fertilizer dryer: Dry the excess moisture in the produced granular organic fertilizer to below 15% for easy storage and increased strength.

Organic fertilizer cooler: The temperature of the dried organic fertilizer particles is very high, and the particles are promptly cooled to quickly cool and shape, and enter the next process.

Organic fertilizer screening machine: Use a screening machine to screen out some unqualified particles, carry out rework and remake, and retain qualified particles for the next process.

Organic fertilizer coating machine: Apply a layer of coating agent evenly on the surface of particles to improve their strength, brightness, and fullness, which is more conducive to preservation.

Organic fertilizer packaging machine: Use an automatic quantitative packaging machine to package particles into bags.

With the continuous development and progress of the production process of organic fertilizer equipment, the manual operation required for organic fertilizer production and processing has gradually decreased, and more importantly, it tends to be automated operation. This production and processing method is not only conducive to management, but more importantly, the quality control of production and processing is strong.