Process introduction and operation method of mixer in npk fertilizer production line

The mixer is used for mixing and mixing materials to realize the balanced collocation of different raw materials. In the fertilizer production line, the thoroughly mixed materials can be granulated by the fertilizer granulator.

The fertilizer mixer should be equipped with secondary leakage protection device. After the power supply is connected, it must pass the test run without load before it can be used. During the commissioning of the mixer, it is necessary to check whether the speed of the mixing drum is appropriate. In general, the speed of the empty car is slightly faster than that of the truck (after loading). If there is a large difference, the ratio of the driving wheel and the driving wheel should be adjusted.

Uses and characteristics of fertilizer mixer:

The mixing equipment is mainly used for the mixing of raw materials. The Huaqiang mixer disc is lined with polypropylene or stainless steel, so it is not easy to stick to the material. Wear-resistant, the use of cycloid reducer has the characteristics of compact structure, convenient operation, uniform mixing, convenient unloading and conveying. The disc mixer adopts polypropylene plate lining or stainless steel plate, so it is not easy to stick to the material. Wear-resistant, the use of cycloid reducer has the characteristics of compact structure, convenient operation, uniform mixing, convenient unloading and conveying. It is used for npk production line.

Working principle of fertilizer mixer:

Start the main mixing motor, drive the mixing parts through the sprocket speed reduction drive. According to the formula set by the electronic instrument, various raw materials are respectively put into the organic fertilizer mixer through the loader or manually. Through the cooling system, various materials with good statistics are mixed, overturned, sheared and kneaded in the mixer to achieve the purpose of fully mixing various raw materials and strains Finally, the discharging motor drives the gate to open and close to realize the discharging operation. Rotary drum granulator can meet the needs of material production.