Recently, the investment project to open an organic fertilizer processing plant has become a popular project, as organic fertilizer can be said to be a marketable product with policy subsidies and support. Many people want to open a small organic fertilizer processing plant, although it is a small organic fertilizer plant, its profitability is not small, and it is also a block in the current cycle. But having a cavity full of enthusiasm is not enough. Let’s take a look at what aspects need to be considered when building an organic fertilizer plant together?

1. Selection of raw materials for organic fertilizer production

There are many raw materials that can produce organic fertilizers, such as cow, sheep, pig and other livestock manure, urban sludge, animal and plant residues, straw, etc. Due to the difficulty in transportation of these raw materials, it is necessary to first determine them based on the principle of proximity. It is also possible to build factories around rich raw materials, which is the first step to consider and a top priority.

2. Production scale and annual output planning

Firstly, determine the expected production scale based on one’s own investment budget. If the investment scope is not limited, conduct in-depth investigation and research from the supply of surrounding raw materials, market demand, and other aspects to determine the expected production scale.

3. Selection of production site

Firstly, considering the cost of land use, choose regions with high cost-effectiveness. Then choose an area with complete water and electricity supply and convenient transportation. Next, choose the area with sparse surrounding residents and closest to the raw materials. You can look for it near the local farm.

4. Determine the process flow for organic fertilizer production

The determination of production process is very important, for example, there is a significant difference between powdered organic fertilizer and granular organic fertilizer. Not only do the finished products have different shapes, but also the production equipment required is different. It needs to be carefully studied and decided based on the surrounding market.

5. Plant construction planning

Visit and learn from large organic fertilizer manufacturers, or inquire with organic fertilizer equipment manufacturers, consider multiple factors, make reasonable plans for organic fertilizer factories, and finalize plans.

The new type of combined organic fertilizer granulator machine has the characteristics of simple organic fermentation fertilizer granulation with organic fertilizer texture, livestock manure, urine, composting fertilizer, green manure, sea fertilizer, cake fertilizer, peat, soil and miscellaneous fertilizer, three wastes, microorganism and so on. The particles are pellets.

The process of the new combined organic fertilizer granulator: according to the needs, several fertilizer raw materials are selected for metering and mixing, and the binder is used as the cement to form granules in the granulator. The granulation of dry powder mixture needs heating, adding water or steam to increase the liquid phase, and then agglomerate into particles in the granulator under rolling condition.
The qualified granulation rate of the machine is more than 80-90%. It can be used in many kinds of formulas. The compressive strength of organic fertilizer is higher than that of disc and drum, and the large ball rate is lower than 15%. The particle size uniformity can be adjusted according to the user’s requirements. The machine is more suitable for the direct granulation of organic fertilizer after fermentation, saving the drying process and greatly reducing the cost.

The disc granulator can be used for various dry powder granulation and wet granulation of dry powder. Wet granulation has a good effect and should be prioritized. It is the main equipment for pelletizing powder materials, with advantages such as uniform pelletizing, easy control of water content in the pellets, high strength of the pellets, simple structure, convenient control, low power consumption, and smooth operation.

Principle of disc granulator: Various dry powder materials are added from the top of the equipment, degassed, spiral pre compressed, and transported to the curved grooves of two rollers. The two rollers rotate at equal speed and in reverse direction, biting the materials into the grooves and performing forced compression. The pressure the materials bear after passing through the compression zone gradually decreases, and their surface tension and gravity cause them to naturally come out. They enter the crusher and granulator for crushing and trimming, and then enter the vibrating screen for screening, Qualified products are sent to the finished product warehouse or directly packaged through a conveyor, and the powder screened materials are sent back to the raw material warehouse for secondary rolling through a feeding device. The size of the extrusion pressure can be adjusted by the hydraulic system according to the particle strength needs. By changing the groove form of the roller surface, materials such as flakes, strips, olives, and flat balls can be obtained.

The structure composition of the cow and sheep manure organic fertilizer disc granulator: The cow and sheep manure organic fertilizer disc granulator is composed of a ball forming disc, a bridge device, a motor, a reducer, a frame, a scraper device, etc.

Performance characteristics of the pan granulator for cow and sheep manure organic fertilizer:

1. The bottom of the ball forming disc is reinforced with multiple radiating steel plates, which have high strength and stiffness;

2. The transmission gear adopts high-frequency quenching treatment, with a long service life;

3. The reducer and motor are driven by flexible belts, ensuring smooth starting and low impact force;

4. The transmission system has added a bridge device to reduce the direct impact of gears and reducers, improving the stability of equipment operation while also improving the service life of main components; 5. Adopting a unique unpowered combination scraper device, the auxiliary power consumption is reduced.

The walking hydraulic lifting organic fertilizer flipping machine is a type of large-scale flipping machine, with a fully hydraulic operating system, a pull rod steering wheel operation, and a track type walking. It is sturdy and durable, with strong power, advanced technology, large output, and strong flipping ability. The hydraulic lifting adjustment of the flipping drum has a high degree of automation, and the operation is simple and easy to master. It is a professional flipping equipment for converting organic materials into organic fertilizers through aerobic fermentation.

The working principle of a large fermenting walking type manure organic fertilizer tipping machine: The crawler type tipping machine rides the entire vehicle on a pre stacked long strip fertilizer base, and the fertilizer base raw materials are mixed, fluffy, and moved by a rotating knife shaft hung under the frame. After passing by, the machine is tampered with into new strip piles. During the flipping process, the material is picked up by a high-speed rotating drum and moved back a certain distance. Therefore, during the flipping process, the flipping machine can break up and crush the material, and take away some moisture.

The walking hydraulic lifting organic fertilizer tipping machine is a green, environmentally friendly, and soil improving bio organic fertilizer made from pollutants such as poultry manure, agricultural waste, sugar factory filter mud, sludge, and household waste through the principle of aerobic fermentation. It can achieve one day’s heating, 3-5 days of deodorization, sterilization (which can completely kill insect eggs and bacteria in feces), and seven days of fertilization, which is faster and more efficient than using other mechanical fermentation methods. According to customer requirements, some auxiliary facilities can also be added, such as automatic sprinkling devices.

The ground stacking and fermentation mode of the walking hydraulic lifting organic fertilizer tipping machine is currently the most cost-effective fertilizer production mode for civil engineering and human resources. The materials need to be stacked into long strips, and stirred and crushed by a stacker at regular intervals to decompose organic matter under aerobic conditions. It has the function of crushing, greatly saving time and labor, significantly improving the production efficiency and product quality of organic fertilizer plants, and greatly reducing costs.

The organic fertilizer production line mainly uses the materials with high content of organic matter to be processed into commercial organic fertilizer after fermentation pretreatment (the appearance of the organic fertilizer is brown or grayish brown powder, no mechanical impurities, no odor). At the same time, the fertilizer production line of organic fertilizer can plan the relevant process according to the different raw materials, storage capacity, usable amount, market demand, etc They are powder fertilizer and granular fertilizer. What are the advantages of granular organic fertilizer over powdered organic fertilizer?

1. For the granular fertilizer produced by the organic fertilizer granulator machine, it is very important to master the particle size distribution of the fertilizer for the storage and transportation of the fertilizer. The granularity is good, and the organic fertilizer is difficult to assemble and has good transportation characteristics.
2. Low water soluble fertilizers usually grind small particles to ensure that they melt reasonably and rapidly in the soil layer and are digested and absorbed by green plants.
3. The granulation of fertilizer improves the production process of agriculture and animal husbandry. The granulation of fertilizer has the function of slow-release fertilizer, which is convenient and not easy to be blown away by the wind.
4. The organic fertilizer production line can add some inorganic components to improve the fertility of the organic fertilizer, while the powder fertilizer and inorganic components can easily digest and absorb water and lump materials.

The specialized granulation equipment for organic and compound fertilizers utilizes the high-speed rotating mechanical stirring force and the resulting aerodynamic force to continuously mix, granulate, spheroidize, extrude, collide, compact, and polish fine powder materials in the machine, achieving pure organic granulation. No adhesive is added during granulation, and the moisture content of the raw materials can be around 20-40%, thus achieving the purpose of granulation.

The rotating stirring tooth granulator for cow and sheep manure cylinder is a molding machine that can manufacture materials into specific shapes. The drum granulator is one of the key equipment in the compound fertilizer industry, suitable for cold and hot granulation as well as large-scale production of high, medium and low concentration compound fertilizers. The main working method is wet granulation of pellets. By using a certain amount of water or steam, the basic fertilizer is humidified in the cylinder and undergoes a thorough chemical reaction. Under certain liquid phase conditions, with the help of the rotational motion of the cylinder, the material particles are squeezed and agglomerated into balls.

The rotating stirring teeth granulator for cow and sheep manure cylinder adopts a special rubber plate lining or acid resistant stainless steel lining plate, achieving automatic scar removal and tumor removal, and eliminating the traditional scraper device. This machine has the characteristics of high ball forming strength, good appearance quality, corrosion resistance, wear resistance, low energy consumption, long service life, and convenient operation and maintenance. Performance parameters: Rotary drum granulator, which is equipped with steam, gas ammonia, or phosphoric acid or nitrogen solution, phosphoric acid ammonia slurry, and heavy calcium slurry, to complete the chemical reaction and heating process of compound fertilizer granulation in the cylinder; Alternatively, in the cold granulation process of adding a small amount of water to the compound fertilizer, the materials that need to be granulated are rotated through the cylinder, causing rolling rotation when there is no material in the cylinder, and then agglomerated into balls at a certain humidity and temperature to complete the granulation process.

The particle shape of the specialized granulation equipment for organic and compound fertilizers is spherical, with a particle size standard generally between 3-6mm and a granulation rate of ≥ 90%. The size of the particle diameter can be adjusted appropriately by the material mixing amount and the spindle speed. Generally, the lower the mixing amount, the higher the rotation speed, and the smaller the particles. The finer the basic particles of the material, the higher the sphericity of the particles, the better the ball forming quality, and the stronger the particles. After granulation, they can be sieved, reducing drying energy consumption. (Suitable raw materials for processing organic fertilizers include animal manure, waste residue, edible mushroom residue, sludge, crop straw, crude fiber, organic waste, etc.)

How much is the hydraulic lifting tank type fermentation tipping machine with multiple tanks and one machine? The multi tank one machine hydraulic lifting tank fermentation tipping machine adopts high-strength chain transmission, hydraulic control lifting, and track design. The use of multiple tanks one machine is to use fixed tank composting tipping equipment. The organic fertilizer fermentation tipping machine can be divided into 3 meters, 4 meters, 5 meters, 6 meters, 8 meters, 10 meters and other equipment according to the width of the tank. Generally, the tank height is about 1.2 meters to 1.5 meters, and can also be customized. Domestic equipment is mostly powered by electricity.

Multi tank one machine hydraulic lifting tank type fermentation tipping machine

1. The hydraulic lifting tank type fermentation tipping machine with multiple tanks and one machine can reach a stacking span of 2-15 meters, and the fermentation cycle is about 15-20 days. The length of the fermentation tank depends on the situation. It is possible to feed at the inlet every day and discharge at the other end. Feed and process daily.

The innovation of the multi tank, one machine hydraulic lifting tank type fermentation tipping machine is the new technology of long-distance stacking, which utilizes limited ground area to achieve large-scale harmless treatment of organic waste.

3. Compact structure, advanced technology, and the use of some beneficial microorganisms can promote the rapid decomposition of organic waste such as livestock manure. Adopting a unique tank type continuous aerobic fermentation technology, organic waste is quickly decomposed, dehydrated, sterilized, and deodorized, achieving the goal of harmless, resourceful, and reduced treatment, with low energy consumption and stable product quality.

4. The intelligent automatic control of the fermentation material turnover process by the multi tank, one machine hydraulic lifting type fermentation tipping machine. Under the action of the longitudinal and transverse walking mechanisms, the fermentation material produces a certain amount of turnover displacement in the tank, and the material gradually moves back in a continuous and equal distance in the tank, forming a continuous and good itching fermentation process. The stirring knife not only flips evenly and oxygenates, but also has the function of crushing materials.

5. The electronic control system of the multi tank, one machine hydraulic lifting tank fermentation tipping machine is advanced and reliable, easy to operate, and equipped with remote control, automatic, and manual functions

A major technological breakthrough of the multi tank, one machine hydraulic lifting tank fermentation tipping machine lies in the integration of the crushing function in the later stage of material fermentation. At the same time, oxygen enters during the stirring process, which can achieve one day heating, deodorization, and two days of sterilization.

The multi tank, one machine hydraulic lifting tank type fermentation tipping machine is an organic fertilizer fermentation equipment suitable for industrial fermentation treatment of organic solid substances such as livestock and poultry manure, mushroom fungi, household waste, sludge, crop straw, etc. It can also be used for various fermentation treatment ranges such as feed fermentation.

Disc granulator as an old machine, fertilizer granulator machine price concessions, experienced the test of a variety of materials, but any equipment will have advantages and disadvantages. With the diversification of raw materials, organic fertilizer equipment manufacturers are constantly developing new granulation equipment. Organic fertilizer granulator machine manufacturers help you solve the problem that the material is difficult to form in disc granulation.
In addition to the subjective factors of raw material composition, the particle forming of disc granulator is also closely related to the fineness of raw material, water content, the addition of auxiliary adhesive and the angle of disc operation. These problems should be constantly tried, according to their own material situation to achieve their own ratio, do some improvement, can achieve our expected value.

Characteristics of disc granulator in production line
1) The use of a unique combination of no power blade integration to reduce auxiliary power consumption.
2) The tilt angle of the large plate can be adjusted. The angle gasket is used for flexible and convenient adjustment.
3) The structure of disc granulator is novel and reasonable, and its weight and height are reduced.
4) The large plate is composed of plate body and plate section. Reduce the main motor power. The disc section can be adjusted up and down along the disc body.
5) When the feed ball is discharged, it can ensure that the feed ball will not be pulled or torn.
6) The whole organic fertilizer granulator machine is made up of non power combined blade for edge cleaning and bottom cleaning, angle cleaning blade for angle cleaning, combined with the unique treatment technology of plate body, with high pelletizing rate, no large mud mass, 90 degree ball diameter and 3-5mm particle size.

Domestic sludge is generated from the treatment of domestic sewage, which is produced in residential toilets, kitchens, bathrooms, etc. Therefore, domestic sludge is “nutrient rich”. After fermentation, the organic matter content of domestic sludge is generally as high as 50% or more, with nutrient indicators such as nitrogen, phosphorus, and potassium ranging from 5% to 7%. However, the heavy metal content is very low, which meets the basic standards of organic fertilizer and can be fully used as fertilizer.

The harmless treatment chain plate tipping machine for household sludge is suitable for the trough aerobic composting of organic solid waste such as animal manure, sludge waste, straw, etc.

The walking system of the harmless treatment chain plate tipping machine for domestic sludge adopts the advantages of variable frequency speed regulation, good adaptability to different materials, stable operation, high tipping efficiency, and the ability to perform deep tank operations, effectively shortening the fermentation cycle, improving production efficiency and product quality. Adopting a variable frequency speed control walking system, it can adapt well to changes in workload.

The harmless treatment of domestic sludge chain plate tipping machine can flexibly adjust the walking speed based on material resistance, making the equipment more adaptable and flexible. Optional mobile crane can be used to achieve multi tank equipment operation. With the capacity of the equipment allowing, simply adding a fermentation tank can expand the production scale and improve the equipment’s value.

The working principle of the harmless treatment chain plate tipping machine for domestic sludge: This machine is designed reasonably, with low motor power consumption, and a high-quality hard faced gear reducer for transmission, with low noise and high efficiency. Key parts such as the chain are made of imported components, which are durable and durable. The lifting adopts an oil pressure device, and the depth of the pile can reach 1.8-2.0 meters. The vertical lifting height of the material can reach 2 meters, and it stays in the air for a long time without the need for aeration. Other forms of tipping machines can do what three fermentation tanks can do, using a chain plate tipping machine is enough.

The disc granulator is widely used for conveying various non-sticky materials in powder, material or small pieces, such as coal powder, cement, clinker, fertilizer and other materials. The advantage is that the output is high, the price is low, the granulation is uniform, and the return rate is relatively low, fertilizer granulator machine price concessions, which leads to higher cost performance and is welcomed by the market. In the working process of the disc granulator, the main elements that affect the pellet quality are:

1. The diameter of the disc. The diameter of the disc is mainly determined by the output, and it is selected according to the production capacity and the supporting requirements of other equipment.
2. The speed of the disc.
3. The inclination angle of the disc. The inclination angle of the disc should be greater than the natural angle of repose of the wetted base material before granulation, otherwise, the material will stick to the disc and rotate with the disc, so that
Can not achieve the purpose of powder into balls on the disc.
4. The circle height of the disc. Once the diameter of the disc is determined, the circle height of the disc can basically be determined.
5. Water spray method. The more uniform the water spray, the more uniform the spherical particles.
6. The position of the scraper.
7. Feeding and watering position.