Belt conveyor is one of the indispensable key equipment in organic fertilizer production line. It is mainly used to transport raw materials, finished products and other materials from one place to another, with high efficiency, stability, environmental protection and other characteristics. The following will give you a detailed introduction to the belt conveyor operation and precautions.
1. Operation steps
1. Check before starting: ensure that there are no obstacles around the belt conveyor, the power supply is normal, the components are firmly connected, and there is no abnormal wear.
2. Start: start the motor first, then start the conveyor belt, and confirm the normal operation before it can be put into use.
3. Operation: Control the speed of the conveyor belt to ensure uniform conveying of materials. If you need to stop, stop the material supply first, then stop the conveyor belt.
4. Precautions: It is strictly prohibited to overload, and it is strictly prohibited to mix metal and other hard objects in the material, so as not to damage the organic fertilizer equipment..jpg)
Ii. Precautions
1. The operator should be trained and familiar with the operation process and precautions of the organic fertilizer production line.
2. During the operation of the equipment, it is forbidden to touch the moving parts.
3. Check the wear of each component regularly and replace the wearing parts in time.
4. Regularly clean up the accumulation and dust around the belt conveyor to ensure the normal operation of the equipment.
5. If abnormal sounds, sparks and other abnormal phenomena are found, they should be stopped immediately for inspection, and then used after troubleshooting.
6. It is strictly prohibited to disassemble and repair the equipment without permission. If there is a fault, contact professional maintenance personnel in time.