The complete set of Organic fertilizer equipment for chicken, duck, goose, cattle, sheep, pig manure is suitable for animal manure, Industrial waste, sludge, biogas residue, crop waste, etc., and the moisture content of raw materials ranges from 60% to 40%. After biological fermentation, ingredients, and stirring, the raw materials are transported by belt to the crusher for crushing, and then transported by belt conveyor to the granulator. The columnar particles (with a diameter of 5-8mm and a length of 5-10mm) produced by the granulator are directly fed into the drying, cooling, screening machine and bagged. After drying, the moisture content of the granular fertilizer can be controlled between 29% and 16%.
How to check and maintain the Organic fertilizer granulator?
1. Check whether each part of the Organic fertilizer granulator works normally, check the wear degree of easily worn parts, and pay attention to replacing worn parts at any time.
2. The newly installed tyre must be checked frequently because it is easy to loosen, which will have the greatest impact on the granulation opportunity of Organic fertilizer.
3. Bearing: it is the load bearing center of the whole Organic fertilizer granulator, so it is very important to maintain the bearing. Its quality directly determines the service life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good.
4. If the oil temperature of the bearing of Organic fertilizer granulator rises, stop the machine immediately to check the cause and eliminate it.
5. Dust and other impurities shall be removed to avoid serious accidents due to the movable bearing can not move on the underframe when the Organic fertilizer granulator encounters unbreakable materials.
6. Use standardized tools and strictly adhere to mechanical maintenance requirements. Standardized tools can reduce damage to all parts of the Organic fertilizer granulator and enable them to be loaded and unloaded in place.
7. Use the specified oil. The lubricating grease and cooling grease used by Organic fertilizer granulators are different due to different types of machinery and different requirements of each part. The lubricating grease and cooling grease specified by the manufacturer of Organic fertilizer granulators must be followed to ensure the good performance of Organic fertilizer granulators.
8. Timely maintenance and repair, and operate without any problems. The reasonable overhaul and timely maintenance of Organic fertilizer granulation equipment is the guarantee for Organic fertilizer granulator to achieve high yield and efficiency.
9. When replacing Organic fertilizer raw materials, production tests must be carried out to ensure that the Organic fertilizer granulator plays its best role.
10. Reasonable raw material composition, fineness, water content, and reliable finished products are the basis of Organic fertilizer granulator.