The organic fertilizer crusher uses the weight of the material itself to fall into the high-speed rotating chain in the crushing chamber of the vertical crusher through the feed port, and flings the material to the inner wall of the cylinder with the help of the centrifugal force of the rotor of the vertical crusher. Therefore, under the combined action of rebound force and gravity, the crushed material rotates rapidly in the inner chamber of the vertical crusher.
Organic fertilizer equipment crushing equipment does not discharge what is the reason? The analysis is as follows:
1, the feed port of the organic fertilizer crusher is not easy to feed, and the diagonal is not conducive to feeding. The straight mouth increases the feeding center of gravity, making the feeding speed faster.
2. Design issues. Some manufacturers of organic fertilizer crusher do not look at the appearance, the internal design will be unreasonable, if the rotor disc is too large, the size of the crushing chamber will be reduced, the rotor disc is too large, the size of the crushing chamber will also be reduced. When you move in a circle, the material gets wrapped up more. A lot, so there will be a problem of not being able to cut. Therefore, at this point, it is recommended to use equipment from regular large manufacturers.
3, for wet materials, especially viscous materials, if the crushing time is too long, the wet material will adhere to the hammer head, rotor disk, lining plate, thereby reducing the size of the crushing chamber, not only reduce the crushing efficiency, output, there will be no cutting problems.
4. Size of discharge port. There are many types of organic fertilizer crusher, different yields, different models, so the design of the discharge port is also different, all of which are proportional