Organic fertilizer fermentation compost windrow turner has many functions, but no matter how many functions, we all need to use it correctly. We must master the correct method when using it. If you don’t master the correct method, you can’t make the organic fertilizer windrow turner play its role completely. What are the correct use methods of organic fertilizer windrow turner?
Usage of trough compost windrow turner:
1. Check whether the oil system and lubrication system are unblocked. If not, inform the maintenance personnel to repair immediately;
2. Check whether the oil in the oil tank is enough, if not, add enough
3. Check whether there is leakage in the hydraulic system. Before starting up, carefully check whether all parts of the mechanism are in good condition, whether the position of each transmission handle and speed change handle is correct, and carefully lubricate and maintain the machinery as required.
4. Pay attention to observe the machine and make all preparations before starting the machine;
5. Before starting the machine, turn the parts of the machine that can rotate, observe whether there is any abnormality during the mechanical rotation, and timely inform the maintenance personnel to repair the situation
6. When the organic fertilizer machine is started, first turn on the power switch to make the machine power on, and then turn on the switch of the electric oil pump and each motor for trial implementation. After stopping the rail change vehicle, the operation can be carried out on the machine frame
7. During the operation of the equipment, if the main shaft vibrates, the noise is large, the pressure is high, the temperature is more than 65 ° C, and other abnormal conditions are found, check the situation with the machine maintenance personnel immediately, and take time to deal with it;
8. In case of mechanical failure, relevant personnel shall be informed immediately to find out the cause and eliminate the fault. It is not allowed to handle without authorization. It is strictly forbidden to work with the equipment with defects.
9. When the work is finished and the machine is stopped, the fan should be shut down first and the drum should be operated for 2-3 minutes to desliminate before shutdown. Then do a good job of maintenance, brush away the iron dust, lubricate and add oil, cut off the power supply.